1Z0-1033-20 Practice Dumps - Verified By TestBraindump Updated 95 Questions
Updated 1Z0-1033-20 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION 30
The user would like to run the "SFDC Quote Upsert" on a commerce action. Where would the user define this within CPQ?
- A. The user will define the relation in the Integration Center under the Integration Platfrom within the Admin Homepage.
- B. The user will select the "SFDC Quote Upsert" from the Modify tab in the commerce action.
- C. The user will define the action to run in the SOAP Generator XSL.
- D. The user will select the "SFDC Quote Upsert" from the Integration list in the Integration tab on the commerce action.
Answer: D
NEW QUESTION 31
A customer has BOM Mapping configured on their site using a simple Table-Based BOM Mapping rule.
However, they want to modify their BOM Mapping to also map an additional Configuration attribute to a Transaction Line level attribute.
Which two methods can the customer use to achieve this? (Choose two.)
- A. Add a new entry in the BOM Attribute Mapping table for the BOM item.
- B. Add a new entry in the BOM Item Mapping Definition table for the BOM item.
- C. Add a new entry in the BOM Attribute Definition table for the BOM item.
- D. Define an Advanced BML-Based BOM Mapping rule that populates the "fields" node of the BOM item.
- E. Define an Advanced BML-Based BOM Mapping rule that populates the "attributes" node of the BOM item.
- F. Define an Advanced BML-Based BOM Mapping rule that populates the "definition" node of the BOM item.
Answer: A,E
NEW QUESTION 32
There are two single-select attributes in an array set. The first single-select attribute shows a list of countries and the second attribute shows a list of states.
Which is the most efficient way to show relevant states based on chosen country?
- A. Use the Hiding rule, which is the only possible option, because arrays do not do not support Constraint rules.
- B. Load all country and state combinations in a data table and write a Constraint rule to lookup the data table.
- C. Create a Constraint rule for each country in the drop-down list by using Simple Conditions and select valid states for the Action attribute of the rule. In this case, number of rules will be equal to the number of countries in the list.
- D. Create Hiding rules for each country with Simple Conditions, and then select valid states for the Action attribute. In this case, the number of Hiding rules will be equal to the number of countries.
Answer: D
NEW QUESTION 33
Identify four types of attributes that can be set by formulas. (Choose four.)
- A. Single Select Menu Attributes
- B. Date Attributes
- C. Text Attributes
- D. Boolean Attributes
- E. Currency Attributes
- F. Integer Attributes
Answer: B,D,E,F
NEW QUESTION 34
What is the correct procedure for moving a file from one folder to another in File Manager?
- A. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Move button.
- B. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, click the destination folder, and click the Move button.
- C. Click File Manager on the Admin home page, click the source file folder, click the file you want to move, and drag the file to the destination folder.
- D. Click File Manager on the Admin home page, click the source file folder, select the check box next to the file you want to move, select the destination folder from the Select Folder drop-down menu, and click the Copy button.
- E. Click File Manager on the Admin home page, click the source file folder, right-click the file you want to move and select Copy from the shortcut menu, click the destination file folder, and right-click in the list of files in that destination folder and select Paste from the shortcut menu.
Answer: C
NEW QUESTION 35
An administrator tries to change the document views on an attribute from a participant profile on a given step.
But the attribute is not listed in the list of attributes that are available for editing.
What are two reasons for this behavior? (Choose two.)
- A. The attribute is being referenced in an active Hiding rule.
- B. The attribute is hidden on the Attribute Details page.
- C. The attribute is a system attribute.
- D. The attribute is not added to the layout.
Answer: A,D
NEW QUESTION 36
Which operation is allowed in a BMQL query?
- A. SELECT, INSERT, and DELETE
- B. SELECT
- C. SELECT, INSERT, and UPDATE
- D. SELECT and UPDATE
Answer: B
NEW QUESTION 37
How can information that is stored in a part field be shown in the line item grid column in Commerce?
- A. by adding a column to Commerce Layout Editor
- B. by adding a field to the part database
- C. by adding a column to the Line Item Details layout in the Commerce Layout Editor
- D. by adding a column and mapping it to the field in the line item grid in Commerce Layout Editor
Answer: D
NEW QUESTION 38
What is the correct navigation path to create Account Integrations?
- A. Admin > Accounts >Add >Integration
- B. Admin > Accounts > Import >Integration > Add
- C. Admin > Accounts > Integration > Add
- D. Admin > Process Definition > Integrations > List > Add
Answer: C
NEW QUESTION 39
To add items (parts) to a configuration, Recommended Item rules are used. Which two statements are true when using Recommended Item rules?
- A. Recommended Item rules can return only the base price of an item (part) and cannot use dynamic prices based off data tables.
- B. If multiple Recommended Item rules recommend the same item (part), the item (part) price is picked from the rule that is last in the order.
- C. If multiple Recommended Item rules return the same item (part), the quantity of the item (part) is a total of all quantities returned by each rule.
- D. Recommended Item rules can show only the base prices defined in the customer specific module.
Answer: B,D
NEW QUESTION 40
What would you do if a partner organization is no longer needed and the access of all users needs to be removed?
- A. Open the list of partner organizations and set the value of Maximum Users to "0".
- B. Proxy log in as superuser, go to the list of partner organizations, and select the partner organization and delete it.
- C. Go to the list of partner organizations, perform a proxy log in as the superuser of the partner organization, go to the list of users, select all active users, and click Inactivate.
- D. Proxy log in as superuser, go to the list of partner organizations, and select Denied in the Access drop-down list.
Answer: C
NEW QUESTION 41
What is the order of execution when a new transaction is created?
- A. advanced main doc default BML, attribute defaults, main doc integration
- B. process integration, attribute defaults, advanced main doc default BML
- C. process integration, attribute defaults, advanced main doc default BML, main doc integration
- D. process integration, advanced main doc default BML, attribute defaults
- E. attribute defaults, advanced main doc default BML, process integration
- F. main doc integration, advanced main doc default BML, attribute defaults
Answer: E
NEW QUESTION 42
Your customer has sales organizations in two countries. The customer wants to make sure that users from one country have access only to quotes from that country.
How do you achieve this?
- A. Define two groups: Country A and Country B. Define a participant profile, Sales, for each step. Define an auto-forwarding rule which returns either "Group A~company~Sales" or "Group B~company~Sales."
- B. Define two groups: Country A and Country B. For each step, define two different participant profiles:
Profile A and Profile B. For each profile, select one matching group. - C. Define different steps (for example, Pending A and Pending B) for each country. The participant profile of each step allows access through user groups (either Group A or Group B depending on the step).
Using transition rules, make sure that quotes for Country A are always moved to steps belonging to that country. - D. Hide Transaction Manager in CPQ and make sure that all access to quotes is performed from the CRM system where you can easily define which quotes should be visible for different users.
Answer: B
NEW QUESTION 43
Along with Part Number, Quantity, and Price, you also want to send additional recommended item details from Configuration to Commerce by using a Recommended Item rule.
Which two options enable you to achieve this? (Choose two.)
- A. Pass the additional details by storing them in a Price Book.
- B. This is not feasible. Only Part Number, Quantity, and Price can be passed from Config to Commerce by using Recommended Item rules.
- C. Use BOM Mapping rules.
- D. Use the Comment field to pass additional details.
- E. Concatenate the additional details to Part Number.
Answer: C,D
NEW QUESTION 44
When doing a part search from home page, you have the Create Quote button to create a new Transaction.
How do you change the label of this button?
- A. Go to the Process Invocation admin page, open the Part Search Results page, and change the name of the action that has the type "Start".
- B. Open the Commerce Process admin page, navigate to Process Actions, and change the label of the
"_action_new_transaction" action. - C. Go to the Process Invocation admin page, open the Part Search Results page, select navigation "Rules" of the action that has the type "Start", and change the name of the invocation rule which points to the right commerce process.
- D. Open the Text Administration admin page, go to "C", change the entry "Create Quote" and enter
"Translated Text."
Answer: B
NEW QUESTION 45
After saving content to the Content library, you check the Content library Tree and find that the new content is missing. What would be your immediate action?
- A. Close and re-open the Content Library Tree.
- B. Close, refresh dynamic sources, and re-open the Dynamic Data window.
- C. Deploy Config and Commerce.
- D. Deploy Commerce.
Answer: A
NEW QUESTION 46
In order to obtain additional sets of records when performing a REST call, which of the following sample URLs would a user use to obtain an additional 1000 records?
- A. https://testsite.bigmachines.com/rest/v1/commerceDocumentsExampleTransactions?set=1000
- B. https://testsite.bigmachines.com/rest/v1/commereceDocumantsExampleTransactions?totalResults=1000
- C. https://testsite.bigmachines.com/rest/v1/commerceDocumentsExampletransactions?limit=1000
- D. https:///testsitebigmachines.com/rest/v1/commerceDocumantsExampleTransactions?pffset=1000
Answer: C
NEW QUESTION 47
You want to control the information that can be viewed on the transaction page.
What must you create to accomplish this?
- A. Transition Rules
- B. Internal User Definitions
- C. Participant Profiles
- D. Library Functions
- E. Constraint Rules
Answer: C
NEW QUESTION 48
How can action buttons be hidden in Commerce?
- A. by putting the action button bar on a hidden tab in Commerce
- B. by using Configuration hiding rules
- C. by using profiles and steps in Commerce
- D. by using Commerce hiding rules
Answer: D
NEW QUESTION 49
Which statement is a proper definition of a Punch-In?
- A. Punch-Ins are links that hook into specific product families in the system. They can be used to navigate directly from a product family to another in your application. They can also be used to jump into a specific product family from an external website.
- B. Punch-Ins are buttons that take you to specific pages in the system. They can be used to navigate directly from one page to another in your application.
- C. Punch-Ins are links that relate into specific parts in the system. They can be used to search directly for a given part in your application. They can also be used to search for a specific part from an external website.
- D. Punch-Ins are links that hook into a specific Commerce process in the system. They can be used to navigate directly to a given Commerce process in your application. They can also be used to jump into a specific Commerce process from an external website.
- E. Punch-Ins are links that hook into specific pages in the system. They can be used to navigate directly from one page to another in your application. They can also be used to jump to a specific page from an external website.
Answer: E
NEW QUESTION 50
Select two statements that are true about Test Script found in a function debugger. (Choose two.)
- A. Test Script describes the various functions used in BML.
- B. Test Script is template of how the BML function should be written.
- C. Test Script can be used to compute multiple iterations of the library functions and print each.
- D. Test Script provides a way to test a BML Library function when array type attributes are input parameters.
Answer: A,D
NEW QUESTION 51
......
New (2022) Oracle 1Z0-1033-20 Exam Dumps: https://actualtests.testbraindump.com/1Z0-1033-20-exam-prep.html
