Dell DC0-200 Certification All-in-One Exam Guide Feb-2025
Get Real DC0-200 Exam Dumps [Feb-2025] Practice Tests
What is the duration of the DC0-200 Exam
- Passing Score: 700
- Format: Multiple choices, multiple answers
- Length of Examination: 80 minutes
- Number of Questions: 55
NEW QUESTION # 27
How many PowerEdge 1650 servers can be installed in a Dell 42U rack that already has two PowerEdge 2650 servers, a PowerEdge 6650 server, and a 1U keyboard and monitor drawer?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 28
Which two operations can be performed with the DSA CD? (Choose two.)
- A. run system diagnostics on your server
- B. change the Dell Service Tag via the Service Tag Utility
- C. create Windows 2000 driver/utilities diskette(s)
- D. create NetWare 5.1/6.0 driver/utilities diskette(s)
Answer: C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 29
How do you gain access to the Utility Partition?
- A. reboot the server from the DSA CD
- B. press F2 during POST
- C. press F10 during POST
- D. press ALT-M during POST
Answer: C
NEW QUESTION # 30
Which benefit does Link Aggregation provide, as used by Intel NICs in PowerEdge servers?
- A. provides load-balanced fault tolerance to the network
- B. assures that if one adapter fails, the server remains available to the network
- C. combines multiple adapters into one channel, providing greater bandwidth for network traffic
- D. allows multiple adapters to share the network load, preventing one adapter from being overloaded
Answer: C
NEW QUESTION # 31
Which two features are found on both 24U and 42U Dell racks? (Choose two.)
- A. split rear door for cable access
- B. integrated redundant 1000 watt power supplies
- C. diagnostic LCD panel on the front door
- D. 0U space that can be used for components other than servers and storage
Answer: A,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 32
You are monitoring 100 servers in your environment using ITA. You want to determine which servers are equipped with a remote access controller and the Array Manager agent, as well as view the physical memory of each server on one screen. How should you view this information from ITA?
- A. go to the ITA Logs tab, select the information you want to view, and click the Refresh button
- B. go to the ITA Inventory view, select the information you want to view, and click the Get Inventory button
- C. go to the ITA Remote Address Book, select the information you want to view, and click the Get Addresses button
- D. go to the ITA Search view, select all the information you want to view using one query, and click the Search button
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 33
Using Array Manager, which statement is true about reassigning the drive letter of your active volume (containing your boot disk)?
- A. You mount a volume to your boot disk BEFORE reassigning a drive letter.
- B. You cannot reassign the drive letter of your active volume.
- C. You can only change drive letters on volumes in extended partitions.
- D. You "Remove" the drive letter first, then "Add" a new drive letter.
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 34
What does virtual disk refer to, as used in Dell Array Manager?
- A. contains the physical view of storage entities such as controllers, channels, and array disks
- B. array disks or array disk segments presented to the OS as a single continuous block of storage space
- C. a single array disk in an array of disks
- D. a block of storage accessed by a drive letter
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 35
How would you install Red Hat Linux and Dell-validated drivers for your factory-installed hardware using the Dell Server Assistant CD?
- A. boot to the Dell Server Assistant CD after installing Red Hat Linux
- B. boot the Dell Server Assistant CD and have the Red Hat Linux CDs available
- C. autorun the CD from the GUI after Red Hat Linux is installed
- D. use the Dell Server Assistant CD to create a Utility Partition and launch the installation from the Utility Partition.
Answer: B
NEW QUESTION # 36
You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed and you do not know what network adapters are in the system. Without physically opening the chassis, what are two ways to see which network adapters are installed using the operating system? (Choose two.)
- A. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and view installed adapters
- B. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be named
- C. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view protocol-bound adapters
- D. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will be named
Answer: A,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 37
Which statement is true about using the Save feature of BASP?
- A. It is only available in Windows 2000.
- B. It is used to install and configure the Broadcom Ethernet Controller driver.
- C. It saves a configuration as an executable file.
- D. It lets you transfer teaming configurations to other servers.
Answer: D
NEW QUESTION # 38
You can obtain the Dell Utility Partition in which two ways? (Choose two.)
- A. Download the install file from www.dell.com.
- B. It can be installed from the DSA CD before an OS is installed.
- C. It is included on the hard drive from the factory.
- D. It can be installed from the OpenManage Documentation CD.
Answer: B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 39
Click the Exhibit button. In Red Hat Linux, which network command produces the o utput shown in the exhibit ?
- A. netconfig -r
- B. netstat -s
- C. ifconfig -a
- D. ipconfig
Answer: C
NEW QUESTION # 40
Which command line syntax assigns asset tag 12345 to a PowerEdge server using the Asset Tag Utility?
- A. asset /r 12345
- B. asset /c 12345
- C. asset /s 12345
- D. asset 12345
- E. asset /d 12345
Answer: D
NEW QUESTION # 41
Which three statements are true for the OpenManage IT Assistant inventory page? (Choose three.)
- A. The inventory page supports printing to a printer.
- B. Inventory items in the inventory page for a discovered system are updated upon each discovery round.
- C. The number of columns that can be selected at any one time on the inventory page is limited to ten.
- D. The inventory page is sortable by any column.
- E. The inventory page reports the status of a system.
Answer: A,B,D
NEW QUESTION # 42
You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
- A. system setup
- B. CERC BIOS
- C. PERC BIOS
- D. Array Manager
Answer: C
NEW QUESTION # 43
Which two features are found on both 24U and 42U Dell racks? (Choose two.)
- A. split rear door for cable access
- B. integrated redundant 1000 watt power supplies
- C. diagnostic LCD panel on the front door
- D. 0U space that can be used for components other than servers and storage
Answer: A,D
NEW QUESTION # 44
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?
- A. <Space Bar>
- B. <F4>
- C. <F10>
- D. <Insert>
Answer: B
NEW QUESTION # 45
What is the PCI slot color coding scheme for Dell PowerEdge servers?
- A. 33 MHz slots are orange; 66 MHz slots are blue.
- B. 33 MHz slots are green; 66 MHz slots are cream-colored.
- C. 33 MHz slots are blue; 66 MHz slots are green.
- D. 33 MHz slots are cream-colored, 66 MHz slots are green.
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 46
You just added a new Dell PowerEdge server to the network. In order to use Dell OpenManage IT Assistant to manage it, which three steps do you need to take? (Choose three.)
- A. install Dell OpenManage Remote Access Controller on the new server
- B. install Dell OpenManage Managed System applications on the new server
- C. install Dell OpenManage Management Station application on the new server
- D. ensure that the new server's IP address is in the discovery specified for OpenManage IT
Assistant - E. verify the SNMP settings of the new server
Answer: B,D,E
NEW QUESTION # 47
You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed and you do not know what network adapters are in the system. Without physically opening the chassis, what are two ways to see which network adapters are installed using the operating system? (Choose two.)
- A. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and view installed adapters
- B. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be named
- C. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view protocol-bound adapters
- D. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will be named
Answer: A,D
NEW QUESTION # 48
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- B. The running kernel must have loadable module support enabled.
- C. You must be logged in as root.
- D. You must purchase the Linux version of OMSA.
- E. You must do a custom installation to support Linux.
Answer: A,B,C
NEW QUESTION # 49
Which three components make up the RAID enabler kit for ROMB servers? (Choose three.)
- A. RAID cable
- B. cache memory
- C. RAID backplane
- D. RAID key
- E. cache battery
Answer: B,D,E
NEW QUESTION # 50
......
Difficulty in writing DC0-200 Exam
The Dell DC0-200 exam focuses on many technologies that's why it is getting more and more fame in the IT sector within a short span. Dell updates their tech system and introduces new technologies in the market by this value of Dell DC0-200 exam increases. Therefore by this increases the difficulty of passing the Dell DC0-200 exam. Candidates should pass the Dell DC0-200 exam in order to survive in the IT field. TestBraindump provides latest and valid Dell DC0-200 exam questions. These Dell DC0-200 exam dumps have been verified and reviewed by the Dell professionals and experts. TestBraindump provides what others won't provide you. TestBraindump Dell DC0-200 exam dumps have the latest and verified exam questions which will be asked in the real exam. TestBraindump offers you authentic Dell DC0-200 exam questions. Apart from this we also provide Dell DC0-200 practice test which includes all the practice questions for the Dell DC0-200 exam, Dell DC0-200 exam dumps that will ensure 100% passing surety and the simple user interface of Dell DC0-200 practice test. Our hired professionals who passed their Dell DC0-200 exam well contribute to making Dell DC0-200 exam dumps updated with Dell DC0-200 new questions to ensure candidates to clear their Dell DC0-200 certification exam at first attempt. Candidates can achieve the best result in the Dell DC0-200 exam they need to experience the types of Dell DC0-200 exam question they will be asked to answer and prepare for the Dell DC0-200 test from Dell DC0-200 PDF exam dumps for each and every topic.
Last DC0-200 practice test reviews: Practice Test Dell dumps: https://actualtests.testbraindump.com/DC0-200-exam-prep.html
