[Jul-2025 Newly Released] FCP_FWF_AD-7.4 Dumps for Fortinet Network Security Expert Certified
Updated Verified FCP_FWF_AD-7.4 dumps Q&As - 100% Pass
NEW QUESTION # 34
What could be a probable cause when a client device struggles to maintain a consistent connection to the AP?
Response:
- A. Poor signal strength or RF interference
- B. DHCP scope being too large
- C. AP broadcasting multiple SSIDs
- D. Too few client devices connected
Answer: A
NEW QUESTION # 35
How can you find upstream and downstream link rates of a wireless client using FortiGate?
Response:
- A. On the FortiGate CLI, using the diag wireless-controller wlac -d Sta command
- B. On the FortiAP CLI, using the cw_diag ksta command
- C. On the FortiGate GUI, using the WiFi Client monitor
- D. On the FortiAP CLI, using the cw_diag -d sta command
Answer: C
NEW QUESTION # 36
Which features can be utilized for improved client distribution and efficient bandwidth usage?
Response:
- A. FortiAP load balancing
- B. VLAN load-balancing
- C. Advanced bridge mode options
- D. FortiGate guest management
Answer: A,B
NEW QUESTION # 37
If you're looking to deploy FortiAP devices through a cloud platform, which tool would you use?
Response:
- A. FortiPresence
- B. FortiGate integrated wireless controller
- C. FortiPlanner
- D. FortiAP Cloud
Answer: D
NEW QUESTION # 38
What insights can packet captures provide?
Response:
- A. RF interference levels
- B. The type of encryption being
- C. The quality of the connection between client and AP
- D. Possible issues in the handshake process
Answer: B,C,D
NEW QUESTION # 39
What is the primary function of FortiPlanner?
Response:
- A. Predictive modeling for wireless network planning
- B. Management of FortiAP devices
- C. Wireless network threat analysis
- D. FortiGate device configuration
Answer: A
NEW QUESTION # 40
What is the first step in troubleshooting client connection issues on a wireless network managed by FortiGate?
Response:
- A. Review the client's signal strength
- B. Analyze packet captures
- C. Check the SSID broadcast settings
- D. Verify VLAN configurations
Answer: A
NEW QUESTION # 41
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean? Response:
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that cannot be used because of regulatory channel restrictions
Answer: C
NEW QUESTION # 42
In the context of wireless security, SSID hiding:
Response:
- A. Helps in boosting Wi-Fi signal strength.
- B. Makes the network invisible to casual scanning by devices.
- C. Enables the AP to detect rogue APs.
- D. Allows APs to automatically detect and connect to each other.
Answer: B
NEW QUESTION # 43
Which actions can be taken to provision and manage FortiAP devices using the FortiGate wireless controller?
(Select all that apply)
Response:
- A. Configure advanced wireless settings
- B. Implement VLAN load-balancing
- C. Enable SSID hiding
- D. Create and apply FortiAP profiles
Answer: A,B,D
NEW QUESTION # 44
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds?
(Choose two.)
Response:
- A. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: A,B
NEW QUESTION # 45
In an environment where multiple SSIDs are broadcasted, how can you segregate network traffic for better management?
Response:
- A. Provision guest accounts on each SSI
- B. Deploy advanced wireless settings.
- C. Configure FortiAP profiles.
- D. Use VLANs on SSIDs.
Answer: D
NEW QUESTION # 46
What is the purpose of configuring WPA3 encryption on a wireless network?
Response:
- A. To enable load balancing for wireless clients
- B. To improve wireless signal strength
- C. To manage guest accounts on the network
- D. To provide strong security for wireless communications
Answer: D
NEW QUESTION # 47
When configuring VLANs on SSIDs, what is the primary benefit?
Response:
- A. Enhanced wireless signal strength
- B. Simplified guest management
- C. Improved load balancing
- D. Logical segregation of network traffic
Answer: D
NEW QUESTION # 48
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server?
(Choose three.)
Response:
- A. 58 Egress-VLAN-Name
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 83 Tunnel-Preference
Answer: B,C,D
NEW QUESTION # 49
Which scanning method can be used by FortiGate to detect rogue APs in the environment?
Response:
- A. Client load balancing
- B. VLAN segmentation
- C. Packet capture analysis
- D. Wireless channel monitoring
Answer: D
NEW QUESTION # 50
Using the FortiGate guest management feature, what can be provisioned for wireless networks?
Response:
- A. FortiAP profiles
- B. Guest accounts
- C. VLAN configurations
- D. Advanced bridge mode options
Answer: B
NEW QUESTION # 51
Which two configurations are compatible for Wireless Single Sign-On (WSSO)?
(Choose two.)
Response:
- A. A VAP configured to authenticate locally on FortiGate
- B. A VAP configured for WPA2 or 3 Enterprise
- C. A VAP configured to authenticate using a radius server
- D. A VAP configured for captive portal authentication
Answer: B,C
NEW QUESTION # 52
FortiPresence analytics solution is most beneficial for:
Response:
- A. Predictive modeling for wireless network
- B. Gaining insights into user behavior and network usage
- C. Direct management of FortiAP devices
- D. Threat detection in a network
Answer: B
NEW QUESTION # 53
Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.
Response:
- A. False
- B. True
Answer: B
NEW QUESTION # 54
If a user wants to understand footfall patterns in a wireless network, which Fortinet solution would be most appropriate?
Response:
- A. FortiGate integrated wireless controller
- B. FortiPresence
- C. FortiPlanner
- D. FortiAP Cloud
Answer: B
NEW QUESTION # 55
How can you provision a FortiAP device?
Response:
- A. Using the FortiGate integrated wireless controller
- B. Directly via the FortiAP's web interface
- C. Using FortiPlanner
- D. Using FortiPresence analytics
Answer: A
NEW QUESTION # 56
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required?
(Choose two.)
Response:
- A. An X.509 to authenticate the authentication server
- B. A WPA2 or WPA3 personal wireless network
- C. An X.509 certificate to authenticate the client
- D. A WPA2 or WPA3 Enterprise wireless network
Answer: A,D
NEW QUESTION # 57
......
Latest FCP_FWF_AD-7.4 Exam Dumps Fortinet Exam from Training: https://actualtests.testbraindump.com/FCP_FWF_AD-7.4-exam-prep.html
