Attested 350-401 Dumps PDF Resource [2022]
Latest 350-401 Actual Free Exam Questions Updated 305 Questions
The Cisco 350-401 exam is meant to help candidates with the mastery of core enterprise networking technologies such as network assurance, infrastructure, automation, and security. All in all, this test is related to four certifications including the Cisco Certified Specialist-Enterprise Core, CCIE Enterprise Wireless, CCIE Enterprise Infrastructure, and CCNP Enterprise.
Infrastructure: This domain focuses on infrastructure and its associated concepts. The areas of its focus include the following:
- Layer 2 concepts, which requires troubleshooting dynamic and static 802.1q trunking protocols as well as static and dynamic EtherChannels. It also covers skills in configuring and verifying common Spanning Tree Protocols (MST and RSTP);
- IP Services, covering NTP, NAT/PAT, first-hop redundancy protocols, and multicast protocols.
- Layer 3 concepts, which covers comparing routing concepts of OSPF and EIGRP; configuring and authenticating OSPF environments, and eBGP between closely connected neighbors;
- Wireless concepts, covering knowledge of Layer 1 concepts, AP modes, and antenna categories, as well as access point discovery, principles, use case for Layer 2 and 3 roaming, WLAN configuration, and wireless client connectivity concerns;
What are the prestigious career opportunities?
With CCIE Enterprise Infrastructure, CCIE Enterprise Wireless, and/or CCNP Enterprise under your belt, you can boost your career to a higher level. Thus, the certified professionals can take up various positions, including an Enterprise IT Infrastructure Architect, an Infrastructure Automation Engineer, a Director of Infrastructure, an IT Infrastructure Security Engineer, a Senior Enterprise Architect, a CCIE Consultant, a Principal Wireless Network Engineer, an Infrastructure Solutions Architect, and many more. The average salary can be up to $120,000 per year, depending on your job role, related tasks, and working experience.
NEW QUESTION 24
A network engineer configures BGP between R1 and R2. Both routers use BGP peer group CORP and are set up to use MD5 authentication. This message is logged to the console of router R1:
- A. Option B
- B. Option D
- C. Option C
- D. Option E
- E. Option A
Answer: A,D
NEW QUESTION 25
Refer to the exhibit.
Which type of antenna do the radiation patterns present?
- A. Yagi
- B. Dipole
- C. Omnidirectional
- D. Patch
Answer: D
NEW QUESTION 26
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
Explanation
Diagram, line chart Description automatically generated
NEW QUESTION 27
What is the responsibility of a secondary WLC?
- A. It registers the LAPs if the primary controller fails.
- B. It avoids congestion on the primary controller by sharing the registration load on the LAPs.
- C. It enables Layer 2 and Layer 3 roaming between Itself and the primary controller.
- D. It shares the traffic load of the LAPs with the primary controller.
Answer: A
Explanation:
When the primary controller (WLC-1) goes down, the APs automatically get registered with the secondary controller (WLC-2). The APs register back to the primary controller when the primary controller comes back on line.
NEW QUESTION 28
Refer to the exhibit. R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?
- A. The DF bit has been set
- B. R2 and R3 do not have an OSPF adjacency
- C. The maximum packet size accepted by the command is 1476 bytes.
- D. R3 is missing a return route to 10.99.69.0/30
Answer: A
NEW QUESTION 29
Refer to the exhibit.
Tunnel-Private-Group-Id(81): 15 Tunnel-Medium-Type(65): IEEE-802(6) Tunnel-Type(64): VLAN(13) A wireless client is connecting to FlexAP1 which is currently working standalone mode. The AAA authentication processis returning the following AVPs:
Which three behaviors will the client experience? (Choose three.)
- A. While the AP is in standalone mode, the client will be placed in VLAN 13.
- B. When the AP transitions to connected mode, the client will be de-authenticated.
- C. When the AP is in connected mode, the client will be placed in VLAN 15.
- D. While the AP is in standalone mode, the client will be placed in VLAN 15.
- E. When the AP transitions to connected mode, the client will remain associated.
- F. When the AP is in connected mode, the client will be placed in VLAN 10.
- G. When the AP is in connected mode, the client will be placed in VLAN 13.
- H. While the AP is in standalone mode, the client will be placed in VLAN 10.
Answer: A,D,G
NEW QUESTION 30
Refer to the exhibit.
Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning-tree port-priority 32 command on G0/1 on SW2, but the port remains blocked.
Which command should be entered on the ports that are connected to Link2 to resolve the issue?
- A. Enter spanning-tree port-priority 64 on SW2.
- B. Enter spanning-tree port-priority 32 on SW1.
- C. Enter spanning-tree port-priority 224 on SW1.
- D. Enter spanning-tree port-priority 4 on SW2.
Answer: B
NEW QUESTION 31
Drag and drop the LIPS components on the left to the correct description on the right.
Answer:
Explanation:
* Map server
* EID
* ETR
NEW QUESTION 32
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 33
Which PAgP mode combination prevents an Etherchannel from forming?
- A. auto/desirable
- B. desirable
- C. auto/auto
- D. desirable/desirable
Answer: C
Explanation:
There are two PAgP modes:
The table below lists if an EtherChannel will be formed or not for PAgP:
NEW QUESTION 34
In an SD-Access solution what is the role of a fabric edge node?
- A. to connect the fusion router to the SD-Access fabric
- B. to connect wired endpoint to the SD-Access fabric
- C. to connect external Layer 3- network to the SD-Access fabric
- D. to advertise fabric IP address space to external network
Answer: B
Explanation:
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects
NEW QUESTION 35
Which antenna type should be used for a site-to-site wireless connection?
- A. dipole
- B. patch
- C. Yagi
- D. Omnidirectional
Answer: C
Explanation:
Explanation
Graphical user interface, text Description automatically generated
NEW QUESTION 36
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
- A. 192.168.101.18
- B. 192.168.101.14
- C. 192.168.101.10
- D. 192.168.101.6
Answer: A
NEW QUESTION 37
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
Explanation:
Explanation
We cannot filter traffic that is originated from the local router (R3 in this case) so we can only configure the ACL on R1 or R2. "Weekend hours" means from Saturday morning through Sunday night so we have to configure: "periodic weekend 00:00 to 23:59".
Note: The time is specified in 24-hour time (hh:mm), where the hours range from 0 to 23 and the minutes range from 0 to 59.
NEW QUESTION 38
Which statement about TLS is accurate when using RESTCONF to write configurations on network devices?
- A. It is used for HTTP and HTTPS requests
- B. It requires certificates for authentication
- C. It is not supported on Cisco devices
- D. It is provided using NGINX acting as a proxy web server
Answer: D
NEW QUESTION 39
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
- A. 192.168.101.18
- B. 192.168.101.14
- C. 192.168.101.10
- D. 192.168.101.6
Answer: A
Explanation:
Explanation
The '>' shown in the output above indicates that the path with a next hop of 192.168.101.2 is the current best path.
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost > eBGP Peering > Router ID BGP prefers the path with highest weight but the weights here are all 0 (which indicate all routes that are not originated by the local router) so we need to check the Local Preference. Answer
'192.168.101.18' path without LOCAL_PREF (LocPrf column) means it has the default value of 100.
Therefore we can find the two next best paths with the next hop of 192.168.101.18 and
192.168.101.10.
We have to move to the next path selection attribute: Originate. BGP prefers the path that the local router originated (which is indicated with the "next hop 0.0.0.0"). But none of the two best paths is self-originated.
The AS Path of the next hop 192.168.101.18 is shorter than the AS Path of the next hop
192.168.101.10 then the next hop 192.168.101.18 will be chosen as the next best path.
NEW QUESTION 40
Refer to the exhibit. External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?
A)
B)
C)
D)
E)
- A. Option B
- B. Option D
- C. Option C
- D. Option E
- E. Option A
Answer: A
NEW QUESTION 41
Which statement about TLS is true when using RESTCONF to write configurations on network devices?
- A. It is used for HTTP and HTTPS requests.
- B. It requires certificates for authentication.
- C. It is not supported on Cisco devices.
- D. It is provided using NGINX acting as a proxy web server.
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/ b_166_programmability_cg/b_166_programmability_cg_chapter_01011.html
NEW QUESTION 42
......
350-401 Certification Overview Latest 350-401 PDF Dumps: https://actualtests.testbraindump.com/350-401-exam-prep.html
