[Feb-2023] Pass Cisco 300-615 Exam in First Attempt Guaranteed!
Full 300-615 Practice Test and 169 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 39
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the inband-telemetry feature
- B. Disable the telemetry feature
- C. Disable the software-telemetry feature
- D. Disable the hardware-telemetry feature
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION 40
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 41
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports to resolve this issue?
- A. Turn on lacp suspend-individual.
- B. Turn on lacp graceful-convergence.
- C. Turn off lacp graceful-convergence.
- D. Turn off lacp suspend-individual.
Answer: C
NEW QUESTION 42 
Refer to the exhibit. An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Adjust the MTU on Router-A to 1600.
- B. Set the OSPF media type to point-to-point.
- C. Disable the check of the MTU value.
- D. Adjust the MTU on Router-B to 1604.
Answer: C
Explanation:
Section: Network
NEW QUESTION 43
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
- A. Change the PIN groups on the vHBAs.
- B. Set the FCoE VLAN as the native VLAN on server uplinks.
- C. Modify the FCoE VLAN.
- D. Modify the VLAN assignment to vNICs.
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 44
Refer to the Exhibit.
An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?
- A. Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.
- B. Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.
- C. Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- D. Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
Answer: B
NEW QUESTION 45
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. event policy-default count 1 time 100
- B. event cli match 'configure terminal'
- C. event syslog occurs 10
- D. action 2.0 event-default
Answer: D
NEW QUESTION 46
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" is the default interface status in ACI.
- B. "out-of-service" indicates that no service graph is in use for this interface.
- C. The interface is working correctly and fully operational, but it is not in use.
- D. The interface policy is misconfigured.
Answer: D
NEW QUESTION 47
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action prevents this issue from reoccurring?
- A. Run the shutdown and then no shutdown commands on the interface.
- B. Verify that the SFPs are supported.
- C. Run the switchport ignore bit-errors command on the interface.
- D. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION 48
Refer to the exhibit.
After an unexpected reload of the Cisco Nexus 9000 Series Switch, the network administrator noticed that one of the Software Maintenance Upgrades (SMU) images is inactive. The engineer must ensure that the package remains active after the switch is reloaded in the future. Which action accomplishes this goal?
- A. Save the running configuration after activating the package.
- B. Copy the SMU package file on the bootflash.
- C. Commit the package using the install commit command.
- D. Deactivate and uninstall the active core package.
Answer: C
NEW QUESTION 49
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION 50
The external routes fail to propagate to leaf switches in Cisco ACI fabric. Which two actions resolve the issue?
(Choose two.)
- A. Enable the VTEP pool in the fabric.
- B. Assign an MP-BGP AS number to the fabric.
- C. Specify the spine nodes as route reflectors.
- D. Configure an MP-BGP area.
- E. Associate the correct contract to the L3Out.
Answer: B,C
Explanation:
Section: Network
NEW QUESTION 51
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 52
Refer to the exhibit.
The vPC neighborship between two switches is in suspended state. Which configuration change resolves the issue and brings up the vPC neighborship?
- A. Enable Bridge Assurance on the local switches
- B. Configure QoS MTU value of 9216 on the peer switch
- C. Change STP Port Type to Network on the peer switch
- D. Add VLAN 400-401 to the configuration on the local switch
Answer: B
NEW QUESTION 53
Refer to the exhibit.
A client reports that the routing protocol neighborship fails to start between two Cisco Nexus switches, N9K-1 and N9K-2. Which action resolves the issue?
- A. Configure a unicast access list to allow the negotiation between N9K-1 and N9K-2
- B. Add MTU configuration to interface e1/1 on both Cisco Nexus switches
- C. Configure a multicast access list to allow the negotiation between N9K-1 and N9K-2
- D. Add OSPF routing configuration to interface e1/1 on both Cisco Nexus switches
Answer: A
NEW QUESTION 54
......
Get Latest 300-615 Dumps Exam Questions in here: https://actualtests.testbraindump.com/300-615-exam-prep.html
