300-715 Training & Certification Get Latest CCNP Security Updated on Jan 06, 2025
Certification Training for 300-715 Exam Dumps Test Engine
To prepare for the exam, candidates can take advantage of various training resources offered by Cisco, including instructor-led courses, self-paced e-learning modules, and hands-on labs. They can also use study guides and practice exams to assess their readiness and identify areas for improvement.
Preparing for the Cisco 300-715 exam requires a thorough understanding of the exam objectives and a solid understanding of Cisco ISE solutions. Cisco provides several resources to help candidates prepare for the exam, including training courses, study materials, and practice exams. 300-715 exam is a challenging test of the candidates' skills and knowledge, and passing it is an important step towards becoming a certified Cisco ISE professional.
NEW QUESTION # 44
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization policy doesn't correctly grant them access to the finance devices.
- B. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- C. The finance location is not a condition in the policy set.
- D. The IT training rule is taking precedence over the IT Admins rule.
Answer: C
NEW QUESTION # 45
A customer wants to set up the Sponsor portal and delegate the authentication flow to a third party for added security while using Kerberos Which database should be used to accomplish this goal?
- A. LDAP
- B. RSA Token Server
- C. Active Directory
- D. Local Database
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ise_admin_guide_26/b_ise_admin_guide_26_chapter_01111.html#concept_srz_bkb_4db
NEW QUESTION # 46
Drag and Drop Question
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuration/xe-3se/3850/sec- user-8021x-xe-3se-3850-book/config-ieee-802x-pba.html
NEW QUESTION # 47
An engineer needs to configure a compliance policy on Cisco ISE to ensure that the latest encryption software is running on the C drive of all endpoints. Drag and drop the configuration steps from the left into the sequence on the right to accomplish this task.
Answer:
Explanation:
NEW QUESTION # 48
What are the three default behaviors of Cisco ISE with respect to authentication, when a user connects to a switch that is configured for 802.1X, MAB, and WebAuth? (Choose three)
- A. MAB traffic uses internal endpoints for retrieving identity.
- B. Unmatched traffic is dropped because of the Reject/Reject/Drop action that is configured under Options.
- C. Unmatched traffic is allowed on the network.
- D. Dot1X traffic uses a user-defined identity store for retrieving identity.
- E. Dot1x traffic uses internal users for retrieving identity.
Answer: A,B,D
NEW QUESTION # 49
A network engineer is configuring Cisco TrustSec and needs to ensure that the Security Group Tag is being transmitted between two devices Where in the Layer 2 frame should this be verified?
- A. CMD filed
- B. 802.1 AE header
- C. Payload
- D. 802.1Q filed
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/dam/global/en_ca/assets/ciscoconnect/2014/pdfs/policy_defined_segmentation_with_trustsec_rob_bleeker.pdf (slide 25)
NEW QUESTION # 50
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when allowing multiple IP phones to be connected
- C. when allowing a hub with multiple clients connected
- D. when preventing users with hypervisor
Answer: C
NEW QUESTION # 51
An administrator connects an HP printer to a dot1x enable port, but the printer in not accessible Which feature must the administrator enable to access the printer?
- A. change of authorization
- B. RADIUS authentication
- C. TACACS authentication
- D. MAC authentication bypass
Answer: D
Explanation:
https://community.cisco.com/t5/network-access-control/ise-for-printer-security/m-p/3933216
NEW QUESTION # 52
What are two components of the posture requirement when configuring Cisco ISE posture?
(Choose two )
- A. conditions
- B. updates
- C. remediation actions
- D. Client Provisioning portal
- E. access policy
Answer: A,C
NEW QUESTION # 53
A company is attempting to improve their BYOD policies and restrict access based on certain criteria. The company's subnets are organized by building.
Which attribute should be used in order to gain access based on location?
- A. static group assignment
- B. MAC address
- C. IP address
- D. device registration status
Answer: A
NEW QUESTION # 54
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. radius server vsa sand authentication
- B. dot1x system-auth-control
- C. radius-server attribute 8 include-in-access-req
- D. ip device tracking
- E. aaa authorization auth-proxy default group radius
Answer: A,C
NEW QUESTION # 55
An administrator must block access to BYOD endpoints that were onboarded without a certificate and have been reported as stolen in the Cisco ISE My Devices Portal. Which condition must be used when configuring an authorization policy that sets DenyAccess permission?
- A. Endpoint Identity Group is Blocklist, and the BYOD state is Registered.
- B. Endpoint Identity Group is Blocklist, and the BYOD state is Reinstate.
- C. Endpoint Identify Group is Blocklist, and the BYOD state is Pending.
- D. Endpoint Identity Group is Blocklist, and the BYOD state is Lost.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ISE_26_admin_guide/b_ISE_admin_26_byod.html
NEW QUESTION # 56
A Cisco ISE administrator must restrict specific endpoints from accessing the network while in closed mode. The requirement is to have Cisco ISE centrally store the endpoints to restrict access from.
What must be done to accomplish this task?
- A. Create a profiling policy for each endpoint with the cdpCacheDeviceld attribute.
- B. Add each MAC address manually to a blocklist identity group and create a policy denying access
- C. Add each IP address to a policy denying access.
- D. Create a logical profile for each device's profile policy and block that via authorization policies.
Answer: B
Explanation:
To accomplish this task, the Cisco ISE administrator must follow these steps:
- Create a blocklist identity group.
- Add each MAC address of the endpoints that must be restricted from accessing the network to the blocklist identity group.
- Create a policy that denies access to the blocklist identity group.
- Apply the policy to the network access devices.
NEW QUESTION # 57
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The AD DNS response is slow.
- B. The AD join point is no longer connected.
- C. The certificate checks are not being conducted.
- D. The network devices ports are shut down.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_2x.html#ID612
NEW QUESTION # 58
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 443
- B. TCP 8909
- C. CUDP 1812
- D. TCP 8905
Answer: D
Explanation:
https://community.cisco.com/t5/network-access-control/port-8905-and-or-8909/td-p/3499402
NEW QUESTION # 59
The default (standalone) Cisco ISE node configuration has which role or roles enabled by default?
- A. Administration and Pokey Service
- B. Administration only
- C. Inline Posture only
- D. Policy Service, Monitoring and Admin
Answer: D
NEW QUESTION # 60
An engineer is configuring a dedicated SSID for onboarding devices. Which SSID type accomplishes this configuration?
- A. broadcast
- B. hidden
- C. guest
- D. dual
Answer: C
NEW QUESTION # 61
Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal?
- A. Monthly
- B. Random
- C. Daily
- D. Known
- E. Imported
Answer: B,E
NEW QUESTION # 62
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE. What must be configured within Cisco ISE to accomplish this goal?
- A. Add the root certificate authority to the trust store and enable it for authentication.
- B. Add an OCSP profile and configure the root certificate authority as secondary.
- C. Create an SCEP profile to link Cisco ISE with the root certificate authority.
- D. Create a certificate signing request and have the root certificate authority sign it.
Answer: C
Explanation:
Ref:https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
NEW QUESTION # 63
......
Step by Step Guide to Prepare for 300-715 Exam: https://actualtests.testbraindump.com/300-715-exam-prep.html
