Prepare 300-715 Question Answers Free Update With 100% Exam Passing Guarantee [2024]
Dumps Real Cisco 300-715 Exam Questions [Updated 2024]
Cisco 300-715 exam, also known as Implementing and Configuring Cisco Identity Services Engine, is a certification exam that tests the knowledge and skills of IT professionals in the implementation and configuration of Cisco Identity Services Engine (ISE). 300-715 exam is designed for those who are responsible for managing and securing their organization's network infrastructure through the use of ISE. 300-715 exam covers a range of topics, including network access, device administration, and identity management.
Cisco ISE is a comprehensive network access control and security policy management platform that provides secure access to network resources through multiple authentication methods, including 802.1X, MAC authentication bypass, and web authentication. The Cisco ISE also allows for the integration of third-party security solutions, such as next-generation firewalls and intrusion prevention systems, to enhance network security. As the demand for network security continues to grow, the Cisco ISE has become a critical component of many organizations' security infrastructure, making the Cisco 300-715 exam a valuable certification for IT professionals.
NEW QUESTION # 204
Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two)
- A. Connection Type
- B. iOS Settings
- C. Redirect ACL
- D. Windows Settings
- E. Operating System
Answer: A,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_g
NEW QUESTION # 205
An engineer is designing a new distributed deployment for Cisco ISE in the network and is considering failover options for the admin nodes. There is a need to ensure that an admin node is available for configuration of policies at all times. What is the requirement to enable this feature?
- A. one policy services node and one monitoring and troubleshooting node
- B. one primary admin node and one monitoring and troubleshooting node
- C. one policy services node and one secondary admin node
- D. one primary admin and one secondary admin node in the deployment
Answer: D
NEW QUESTION # 206
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when allowing multiple IP phones to be connected
- C. when preventing users with hypervisor
- D. when allowing a hub with multiple clients connected
Answer: D
Explanation:
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
NEW QUESTION # 207
Which of the following is not true about profiling in Cisco ISE?
- A. Cisco ISE does not support hierarchy within the profiling policy.
- B. The use of Identity Groups is required to leverage the use of profiling in the authorization policy.
- C. Cisco ISE comes with predefined profiles.
- D. Profiling policies are automatically enabled for use.
Answer: A
NEW QUESTION # 208
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8909
- B. TCP 443
- C. TCP 8905
- D. UDP 1812
Answer: A
Explanation:
Section: Endpoint Compliance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010101.html
NEW QUESTION # 209
Which three default endpoint identity groups does Cisco ISE create? (Choose three.)
- A. blacklist
- B. unknown
- C. endpoint
- D. whitelist
- E. profiled
Answer: A,B,E
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ ise10_man_identities.html#wp1203054
NEW QUESTION # 210
A user recently had their laptop stolen. IT has ordered a replacement device for the user and was able to obtain the MAC address of the device 04.57:47:34 35 0A from the vendor before it shipped. Which statement regarding adding MAC addresses to Cisco ISE is correct?
- A. MAC addresses can only be manually imported using a .csv file and the import option.
- B. MAC addresses can only be manually imported using the REST API.
- C. MAC addresses can be manually added using the + sign under Context Visibility > Endpoints.
- D. MAC addresses can only be allowed after the device has connected to the network.
Answer: C
NEW QUESTION # 211
An organization is adding nodes to their Cisco ISE deployment and has two nodes designated as primary and secondary PAN and MnT nodes. The organization also has four PSNs An administrator is adding two more PSNs to this deployment but is having problems adding one of them What is the problem?
- A. Only five PSNs are allowed to be in the Cisco ISE cube if configured this way.
- B. The current PAN is only able to track a max of four nodes
- C. The new nodes must be set to primary prior to being added to the deployment
- D. One of the new nodes must be designated as a pxGrid node
Answer: A
NEW QUESTION # 212
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
NEW QUESTION # 213
An engineer wants to learn more about Cisco ISE and deployed a new lab with two nodes. Which two persona configurations allow the engineer to successfully test redundancy of a failed node? (Choose two.)
- A. Configure one of the Cisco ISE nodes as the Health Check node.
- B. Configure both nodes with the PAN and MnT personas only.
- C. Configure one of the Cisco ISE nodes as the primary PAN and MnT personas and the other as the secondary.
- D. Configure both nodes with the PAN, MnT, and PSN personas.
- E. Configure one of the Cisco ISE nodes as the primary PAN and PSN personas and the other as the secondary.
Answer: C,E
NEW QUESTION # 214
Which two endpoint compliance statuses are possible? (Choose two.)
- A. valid
- B. unknown
- C. compliant
- D. invalid
- E. known
Answer: B,C
Explanation:
Endpoint Compliance Status:
- Unknown Profile
- Compliant Profile
- Noncompliant Profile
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010111.html
NEW QUESTION # 215
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. high-impact
- B. low-impact
- C. open
- D. closed
Answer: C
NEW QUESTION # 216
Which Cisco ISE node does not support automatic failover?
- A. Admin node
- B. Policy Services node
- C. Inline Posture node
- D. Monitoring node
Answer: A
Explanation:
The administration persona can take on any one of the following roles: Standalone, Primary, or Secondary. If the primary Administration ISE node goes down, you have to manually promote the secondary Administration ISE node. There is no automatic failover for the Administration persona.
NEW QUESTION # 217
Refer to the exhibit. An administrator is manually adding a device to a Cisco ISE identity group to ensure that it is able to access the network when needed without authentication. Upon testing, the administrator notices that the device never hits the correct authorization policy line using the condition EndPoints LogicalProfile EQUALS static_list. Why is this occurring?
- A. The identity group is being assigned instead of the logical profile
- B. The dynamic logical profile is overriding the statically assigned profile
- C. The logical profile is being statically assigned instead of the identity group
- D. The device is changing identity groups after profiling instead ot remaining static
Answer: C
NEW QUESTION # 218
An engineer is configuring the remote access VPN to use Cisco ISE for AAA and needs to conduct posture checks on the connecting endpoints After the endpoint connects, it receives its initial authorization result and continues onto the compliance scan What must be done for this AAA configuration to allow compliant access to the network?
- A. Configure the posture authorization so it defaults to unknown status
- B. Fix the CoA port number
- C. Ensure that authorization only mode is not enabled
- D. Enable dynamic authorization within the AAA server group
Answer: D
NEW QUESTION # 219
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.
Answer:
Explanation:
NEW QUESTION # 220
A customer wants to set up the Sponsor portal and delegate the authentication flow to a third party for added security while using Kerberos.
Which database should be used to accomplish this goal?
- A. LDAP
- B. RSA Token Server
- C. Local Database
- D. Active Directory
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
6/admin_guide/b_ise_admin_guide_26/b_ise_admin_guide_26_chapter_01111.html#concept_srz
_ bkb_4db
NEW QUESTION # 221
Which statement is true?
- A. A Cisco ISE Advanced license is perpetual in nature.
- B. A Cisco ISE Advanced license can be used without any Base licenses.
- C. A Cisco ISE Wireless license can be installed on top of a Base and/or Advanced license.
- D. A Cisco ISE Advanced license can be installed on top of a Base and/or Wireless license.
Answer: D
NEW QUESTION # 222
......
Cisco 300-715 exam covers a wide range of topics related to Cisco ISE implementation and configuration, including network access devices, user and device authentication, endpoint compliance, and policy enforcement. It also covers the latest Cisco ISE features and capabilities, such as integration with third-party products and technologies, threat protection, and advanced analytics and reporting.
300-715 Exam Dumps, 300-715 Practice Test Questions: https://actualtests.testbraindump.com/300-715-exam-prep.html
